Bass G^#/A_b Whistles

head with bend tuning barrel for Bass B_b, A, G^# and G

bass G^#/A_b whistle - 270 GBP

made out of light-weight 28mm bore aluminium tubing with elbow bend head.

bass B_b/A/G^#/G combo set - 480 GBP

One head with four bodies for bass B_b, A, G^# and G, using 28mm bore tubing with elbow bend head.

bass G and G^# combo set - 340 GBP

One head with two bodies for bass G and G^#/A_b, using 28mm bore tubing with elbow bend head.

Listen to bass G^# sample (:audioplayer Audio:Bass_Ab_sample-1.mp3:)

This whistle requires large hands for the extra finger stretch, even with piper's grip. Distance between R2 and R3 (hole 5 and 6) is ca 62mm. Hole sizes are a little reduced for an easier reach and covering, hole 5 (R2) is 11.5mm. Both L3 and R3 (hole 3 and 6) are offset by a small amount, to get better covering, even with using piper's grip. Overall length ca. 785mm, mouth to hole 6 distance is about 660mm, requiring a good stretch on the arms. Not for short armed people! The bend tuning barrel design reduces the overall arm stretch considerably, compared to a straight design.

< Bass A Whistles | Up | Bass G Whistles >